If your ink is spits out of your tube tip there can be many reasons for it. A little splattering is normal. It may be caused overloading the ink. Sometimes the reservoir on some of the bottom ends can’t handle too much ink. Keep in mind that a square tip is more prone to splattering than a round one. Also, some of the lighter frames will tend to splatter more than others. You want to make sure that you are checking the tips to see that they are not wearing down. You don’t want them to be worn down to a sharp edge. If you are properly using and tuning your tattoo machine it should be putting the ink out uniformly and will rarely splatter. One of the main problems would be your rubber band re adjust your rubber band to see if that works for you if they are worn down replace them ASAP.
Posted in: tattoo tipsPublished: September 21, 2009